Are you concerned about the presence of moisture under your house? This can be a serious problem, leading to structural damage and health issues. Here are some simple steps you can take to check for moisture under your house:

1. Inspect the foundation

Look for any cracks, gaps, or holes in the foundation. These can be entry points for water, especially during heavy rain or flooding.

2. Check the crawl space

If you have a crawl space under your house, inspect it for any signs of moisture. Look for wet or damp areas, mold, or musty odors.

3. Check the outside grading

The grading around your house should slope away from the foundation to help prevent water from pooling and seeping in. Check for any areas where the grading is not sloped properly.

4. Check for clogged gutters and downspouts

Clogged gutters and downspouts can cause water to overflow and seep into the ground around your house. Make sure your gutters and downspouts are clean and free of debris.

5. Seal any gaps or holes

If you find any cracks, gaps, or holes in the foundation or crawl space, seal them with caulk or foam sealant. This will help to prevent water from entering.

6. Consider a sump pump

If you live in an area with a high water table or frequent flooding, consider installing a sump pump to remove excess water from your crawl space or basement.

By following these steps, you can help to prevent moisture problems under your house and protect your home from damage.